PS4 Beeps Once Then Turns Off | Fixed by Experts
When you try to switch on your PS4 console, it makes one beep, the blue light flashes for a split second, and then it turns off. Then, when you push the power button once more to turn it on, nothing happens.
Occasionally, you try to work around this problem by pulling out the power cable from the wall outlet and reconnecting your console to power. Now you try your luck again. You’ll push the power button, and it will beep once more and seem to turn on before it suddenly turns off once more.
What’s the problem? Is your PS4 dead and it’s time to dispose of it? Or is there any hope to repair it and resolve this issue?
Well, in fact, the “PS4 beeps once then turns off” issue can be resolved and it doesn’t necessarily indicate that your console is dead and that you can’t repair it yourself. Many users could easily work around this issue and get their PS4 back to normal, and that’s what you’re going to learn in this article.
Main Causse Of The Problem
When you notice any issue related to turning on your PS4, always suspect the power supply. In fact, the launch model, the PS4 slim, and the PS4 Pro have all been known to experience this issue, which is often caused by a power-related issue such as your PS4 power supply being defective (read more on what happens to your PS4 when the power supply malfunctions) or the power cable is worn out or damaged.
Power supply failure is the worst-case situation, especially if your PS4 has been struck by a power surge. But, don’t worry, this is not always the real cause. Don’t judge until you figure out the real cause of the problem.
Here are the possible causes that lead the PS4 to beep once and then turn off:
- A defective power supply or power cable.
- The power outlet or the power strip to which you connect your PS4 to is not providing sufficient power to your console or there might be a sort of damage/deficiency inside one of them.
- An electrical short circuit is taking place inside your PS4 body every time you turn it on, and that can be caused by a lost metal object (such as a screw) inside the PS4, lots of accumulated dust, and debris, water fell inside your console or a defective component such as the GPU or the internal system storage.
- One of the connected peripherals is defective.
- The CMOS battery is dead.
So, these are the most common causes, let’s learn how to fix your PS4 that beeps once and then turns off.
Fixing A PS4 That Beeps Once Then Turns Off
You can follow some of the easy methods listed below if your PS4 is still covered by warranty, but avoid opening it. Get Sony to repair it for free if you are still covered under warranty.
1. Disconnect all devices and power cycle your PS4
The very first step to do in the pursuit to resolve this issue is to disconnect all other devices connected to your PS4, such as the controller, headset, external HDD, etc.
Once done, you have to unplug the PS4 power cable from the power outlet.
Even when you disconnect the power cable, the power supply retains some energy. After removing it, wait a while. This will give the circuitry enough time to completely shut down and lose all power.
Press the power button a few times while the system is unplugged. Even when the system is not connected in, you may still hear it beep. This is only a means for you to hasten the system’s power depletion; it’s not an indication of a problem. After it stops beeping, give it a little more time alone before plugging it back in and trying to turn it on once more.
2. Connect your PS4 to another power strip or wall outlet
The power source from which your PS4 receives power might undergo a sort of deficiency, especially if you use a power strip. The best thing you can do here is to connect your PS4 directly to the power outlet, or use another outlet and repeat method #1.
3. Slide the console to the side
It seems strange because the PS4 isn’t really intended to be stored on its side. But this isn’t long-term. Simply rotate the device such that it is standing on its side. This is how the PS2 was traditionally stored. Dust or other inside debris that might be causing a connection to fail may be dislodged as a result.
4. Clear the air vents of all dust.
There is a strip with several air vents that runs along the side of the console. As a result, heated air can escape and cold air can enter the system. Any computer must maintain a cool temperature, therefore dust and dirt covering these vents will make it overheat and cause problems. Verify that nothing is in the way of these.
5. Before starting the console, switch off the TV.
The HDMI output may simply have a bug causing this. It might function properly if you turn on the PS4 first and then the TV. It might only be a temporary hiccup, therefore it shouldn’t be a long-term issue.
6. Connect to another TV
HDMI is now far more sophisticated than it once was. especially when using TVs that support ARC. It can obstruct the system’s startup using a return channel. Whether you have access to another TV, you should try plugging the PS4 into it to see if it will turn on normally.
A double beep should sound if you hold the power for around 10 seconds. In our situation, the system is not reacting to any input. It is essentially gone and dead. To execute a hard reset and completely drain the electricity stored in the power button, hold it down for 30 seconds. Although you ought to have used all the power by this time, it won’t harm to try as it is a straightforward process. Some have had success with it.
8. Replace the Hard Drive after removing it.
On all PS4 models, the hard drive is simple to access without voiding the warranty or disassembling the device. You may occasionally hear a single beep along with the blue light if the HDD connection is loose. The PSU is typically the culprit, but the issue can also be resolved by just taking out and replacing the hard drive.
By doing this, you will not lose any of the data that is on the disk; it is completely secure. When doing this, just make sure the system is not turned on.
9. Clear The CMOS DATA
You have here to remove the CMOS battery and then replace it in order to clear the CMOS data. When the CMOS data is corrupted, the PS4 would behave weirdly, and this behavior you’re facing might be the result. Read more on PS4 CMOS and how to clear it.
10. Seek Assistance From a Technician
At this point when nothing has worked for you, you need to the help of a technician. Either take it to a repair shop or, if you personally know anyone, just invite him to your house and let him check your console.
You may find out eventually that the power supply is defective and you must replace it. Or it might e the GPU, the BDROM, or even the motherboard. The technician will tell you exactly where the problem is.
Conclusion
When you press the power button of your PS4 and it only gives one beep then turns off, most probably it’s a power issue that you have to take care of. Your PS4 power supply might be intact and well-functional, but there’s something else that causes and electrical short circuit or a hardware defeciency to that extent.
Fixing this problem is not always hard, and many newbies were successful overcome it.
