Fixing PS4 Controller Blinks White 30 Times

It happens occasionally that when you try to use your PS4 controller and connect it to the console, it will blink white 30 times and then stops. What does this indicate? And if it’s a problem with the controller, how to fix it?

In this article, you’ll learn why your PS4 controller blinks white 30 times, what that means, and how to fix it.

Why Is the light bar on my PS4 controller blinking white 30 Times?

Seeing the white light blinking 30 times on your PS4 controller indicates a minor issue, such as a lack of connectivity or low battery. It’s safe to say that you should not worry about this happening, as it is a common occurrence.

There are a few potential causes for the white light to be blinking 30 times on and off in the light bar of your PS4 controller.

  • The PS4 Controller’s battery is low and needs to be charged.
  • Despite repeated attempts, the PS4 controller cannot establish a wireless connection with the PS4 system.

In the next section we’ll illustrates a few methods to fixing the PS4 controller blinking white 30 times.

How to fix the PS4 controller blinking white 30 times

In this section, we’ll discuss how to resolve the PS4 controller blinking white 30 times if you are unable to pair it with your PS4 console.

Consider the possibility that low battery power is causing the white lights to blink 30 times before proceeding with the steps below. Make sure your controller has enough power by plugging it into a power source. If that doesn’t get rid of the white light blinking, try these other solutions.

  1. Check out your PS4’s controller
  2. Fix the blinking lights
  3. Reset the analog stick on your PlayStation 4 controller
  4. Reconnect the controllers to your PS4.
  5. Replace the firmware on your PS4 and controller.
  6. Setup the PS4’s Windows driver once more.
  7. Switch to the PS4’s Safe Mode
  8. Employ a Micro USB cable.
  9. If your PS4 is blinking white, try this easy remedy.
  10. Swap out the controller.

Now, here are things you should try in order to fix the PS4 controller blinking white 30 times.

1. Check out your PS4’s controller

The 30-time blinking white light problem in a PS4 controller can be caused by faulty hardware. Your controller may have been damaged due to inappropriate handling, lack of maintenance, or simple aging. If the inner mechanism is broken, the controller might not charge or connect to the console.

This allows you to check if the cables are securely attached. Take apart the controller and reconnect the wires if they are not. Turning it on shouldn’t reveal any visible indicators of activity. Here’s how to fix the PS4 controller that won’t work.

2. Reset the analog stick on your PlayStation 4 controller

Many problems that arise with a PS4 controller can be fixed by just resetting the controller. In addition to the 30-time blinking white light, you can also address Bluetooth connectivity failures, sync problems, and more.

Follow these steps to delete all controller settings from your PS4:

  1. Turn off Your PS4 and unplug it from the power outlet.
  2. On the back of the PS4 controller, there’s a little hole that conceals the Reset button. The reset button is located near the L2 shoulder button on your controller.
  3. To reset the device, insert a pin, toothpick, or straightened paper clip into the hole and press down.
  4. Retain the pin for a few seconds, then pull it out of the opening.
  5. After restarting the computer, you will need to re-pair the controller with the console via the USB cord.
  6. A PS4 can be activated by turning it on and pressing the PS4 button.

To learn more on how to reset the PS4 controller and why you should do it, please read this article.

3. Update the PS4 Controller’s Driver On a Computer

The PS4 controller may be fixed by installing the latest device and driver updates for the PS4 on a computer.

The PlayStation 4 driver is susceptible to malfunction due to damage or obsolete software in the same way that any other driver is. Connecting a PlayStation 4 controller to a computer causes the console to appear in the PC’s device manager. This allows you to update it in the same way that you would update any other driver.

Follow these instructions to update your PS4 controller on Windows:

  1. Type this command: Devmgmt.msc into the Run window that you may access by pressing the Windows key plus R.
  2. This is the Device Manager window’s command. To find the driver for your PS4, browse the extensive database.
  3. Select “Uninstall device” from the context menu after right-clicking the PS4 controller device.
  4. In the confirmation dialogue box, select the option to Delete the driver software for this device, and then click the Uninstall button.
  5. Unplug the PS4 controller and power on the machine again.
  6. Get the most recent drivers from the controller maker and install them. Download it from the Sony PlayStation support website for use with the PS4’s special DualShock 4 controllers.
  7. Hook up the PlayStation 4 controller to the PC and let the driver software do its thing.

Check the controller after completing these procedures to ensure the 30-time blinking lights have stopped. The new device’s driver may have been misplaced; if this is the case, reconnecting it and restarting the computer should solve the problem.

4. Start The PS4 Into Safe Mode

Not everyone knows this, but the PlayStation 4 features a “safe mode” where you can install updates and manage your system’s data without risking damaging your console. Launch the PS4 into safe mode if the controller is blinking white 30 times or not responding. Know that you will be erasing the current setup before you begin.

Before beginning, make sure you’ve saved everything that needs to be.

How to switch to safe mode:

  1. To begin, power down your PlayStation 4. To turn the console on, press the power button on the front panel.
  2. To turn on the device, press and hold the power button for seven seconds, or until you hear two beeps. The first beep sounds when you click the power button for the first time, and the second beep sounds when 7 seconds have passed.
  3. Simply plugging in the PS4’s original controller via USB will put you in safe mode.
  4. Go to the Tools menu, and then click on Rebuild Database to delete the current database and create a new one.

5. Connect the device to a power source using a Micro USB cord

You can use a USB cable to connect your PS4 controller instead of connecting it via Bluetooth. This can be really helpful in some cases where the PS4 controller behaves weirdly during the connection through Bluetooth.

Using the included USB cord, we establish a hardwired link before pairing our devices wirelessly through Bluetooth.

  1. Power off the PS4 and enter sleep mode.
  2. Disconnect the console from the wall outlet.
  3. Turn off the PS4 to completely deplete its battery.
  4. Connect the controller to the system via USB.
  5. Power on the PS4 and hit any button on the controller.

The controller should be detected and the 30-time blinking light should stop.

6. Press the PS the Share buttons Simaltenously

Alternatively, you can press the PS button and the Share button on your controller at the same time to avoid the white flashes. Although this is not the standard procedure for resetting the controller, many users have found it to be effective.

Simply hold down the PS button and the Share button on your controller at the same time, and the PS4 will power up. You should then be able to connect to the console without further incident.

7. Swap out the controller and see if that fixes things

If a PS4 user’s controller is blinking white 30 times, they can use a different controller. Alternatively, users can use a different controller to alter some settings that will eliminate the flickering lights problem.

You must first connect the spare controller to the PS4 and use it to restore functionality to the flashing controller before proceeding with this method of repair. If you have a functional controller, you can follow these directions to fix the problem:

  1. Enter the PS4’s configuration menu.
  2. Navigate to Bluetooth devices in the Devices menu. During this time, only the backup controller will be available.
  3. To use the blinking controller, step 3, press and hold the PS and Share buttons until the light bar flashes twice per second.
  4. Select the non-functional controller and replace it with a different controller. In doing so, an effort will be made to restore communication with the flashing controller.
  5. Answer “Yes” to the question that pops up.

Now that the blinking seems to have ceased, maybe your problem is over.

If none of these solutions works, you may need to seek out expert help or purchase a new controller.

You may also like...

Leave a Reply

Your email address will not be published.